​Improve the anti-wear performance of spray dryer

- Jun 27, 2020-

Improve the anti-wear performance of spray dryer

There are many types of spray dryers used in the drying process of the spray dryer. The machine with the largest amount of use is the centrifugal spray dryer. Its specific work is mainly to dry large materials and use a small-scale spray dryer for secondary drying. When the spray dryer is used, a centrifugal spray dryer and a closed-circuit centrifugal spray dryer are generally used, and the former tower body and the latter have a large degree of wear.

In the process of using the centrifugal spray dryer, it takes a long time to unload and load the tower body, so the material strength used when designing the tower body is relatively high. Since the machine needs to continuously enter high-hardness materials during use, it will greatly increase the degree of wear of the tower body, resulting in the tower body breaking. When using a closed-circuit centrifugal spray dryer, the impact force of the lining board is very large, so materials with high abrasion resistance and strength must be used in the design process.

When the spray dryer is used, its wear rate should be reduced, and abnormal wear and tear should be reduced and eliminated. It is necessary to use equipment reasonably, do good maintenance work, and timely repair.