​Spray drying tower technology for easy maintenance

- Jun 16, 2020-

Spray drying tower technology for easy maintenance

After filtering and heating, the air in the spray drying tower enters the air distributor at the top of the dryer, and the hot air enters the drying chamber evenly in a spiral shape. The material liquid is sprayed into very fine mist-like liquid beads through the high-speed centrifugal atomizer or high-pressure atomizer on the top of the tower body, and it can be dried into a finished product in a very short time in parallel contact with air. The finished product is continuously output from the bottom of the drying tower and the cyclone separator, the fine dust material is collected by the pulse cloth bag collector, and the exhaust gas is evacuated by the fan. Wide range of use: According to the characteristics of the material, it can be used for hot air drying, centrifugal granulation and cold air granulation. Most products with very different characteristics can be produced with this machine.